Fluid Dynamics’ Brazed Plate Heat Exchangers consist of corrugated chevron plates with various brazing materials available for different working conditions.
The high quality of FD Brazed Plate heat exchangers ensures that they are capable of working in high pressure and high-temperature environments subject to model selection. FD Brazed Plate heat exchangers come in a wide range of applications, sizes and brazing materials to ensure the right solution for your needs.
- Long life durability
- Corrosion resistance
- High thermal transfer efficiency
- Easy installation
- Proven & reliable quality
- Flexible flows & temperature monitor option
FD-K Series has the largest range of sizes and is widely used in many applications. Versatile and robust they are ideal for use in HVAC, Heat Pumps, Chillers, Oil Coolers, Process Cooling and Heating.
- The FD-K Series is rated to a maximum working pressure of 45 bar;
- FD-K 215 is dual circuit with 6 connections.
The FD-E/F Series is designed specifically for small volume water to water applications. FD-E Series has a flat cover design while the more economical FD-F Series does not have a flat plate.
A multi-pass pattern is also available for different working conditions and requirements. Main applications for the FD-E/F Series are residential gas boilers, district heating and solar heating systems.
FD-R Series represents the upgrade version of the FD-K Standard Series. It is specially designed for R410A systems with heat transfer efficiency of 10% more than the FD-K Standard Series.
The FD-R Series is perfectly suited to those applications where pressure drop is not the main concern. Fluid Dynamics’ FD-R Series is ideal for Heat Pumps and HVAC applications The FD-KR Series is rated to a maximum working pressure of 45 bar.
The newly innovative FD-Z Series is designed with a diagonal flow pattern which provides higher efficiency and is a worthy replacement of shell & tube, double tube and multi-tube heat exchangers in various applications.
The advantage of the FD-Z Series dual circuit is it provides the best performance in both full load and part load conditions. The FD-Z Series single circuit is specially designed for large volume and high heat transfer efficiency. Note: 400/401/Z600 – 4 connections. 415 / 416 Dual Circuit – 6 connections.
The FD-C Series is specially designed for evaporators, condensers, economisers and oil coolers in R744 (CO2) heat pumps and refrigeration systems. Different designs with maximum working pressure of 70 bar, 100 bar and 140 bar are available for a variety of duties and performance specifications.
Compact size, outstanding heat transfer performance and low pressure drop are the three key features. The quality and durability of the FD-C Series is proved by achieving burst test pressures up to 650 bar and testing over 100,000 cycles.
The FD-H Series is manufactured from material which is resistant to high temperatures up to 900o C. This quality makes the FD-H Series perfectly suited to serve as gas heating or cooling heat exchangers in clean energy technology such as fuel cells and waste heat recovery systems.
The FD-M Series is specially designed for higher chlorine content applications. The FD-M Series is manufactured from corrosion resistant stainless steel equivalent to SM0254 and is ideal for use in chlorine or salt dosed spas and swimming pools.
The FD-I Series is suitable for applications which require protection from thermal shocks or pressure shocks. FD-I Series is designed particularly for use in hydraulic and boiler systems.
The FD-A Series is the innovative design for air dryers.
Combining a precooler, evaporator and separator, this heat exchanger provides both compact size and high thermal transfer performance in one unit.
The patented designed separator dehumidifies compressed air and eliminates the need for a filter avoiding problems with clogging.